Weld Test Supplies
& Destructive Testing Services
WELD TEST COUPONS
BEND TEST JIGS
DESTRUCTIVE TESTING SERVICES
BEND TEST JIGS
DESTRUCTIVE TESTING SERVICES
ONLY $2,499 - ORDER NOW
FREE SHIPPING! (within United States only)
FREE WPS FOR WELDER QUALIFICATION TEST
FREE WPS FOR WELDER QUALIFICATION TEST
MADE IN USAMade of Steel
30 lbs Lightweight Ironman Tough Conforms to AWS B2.1, AWS D1.1, AWS D1.5, AWS D1.8, ASME Section IX $2,499.00 (free shipping) |
Jig owners: Send us your pics and scores!
|
Take AnywhereSmall and Portable
Take it to the jobsite Store it anywhere Ideal for schools, testing labs, CWIs, AWS ATFs, contractors, fabricators, etc. |
WELDER QUALIFICATION TEST COUPONS
PLATE COUPONS
AWS D1.1 Structural Welder Performance Qualification Test Coupons - 1" thick
|
AWS D1.1 Structural Welder Performance Qualification Test Coupons:
1" thick set – ASTM A36 (Qty. 8 beveled edges / 4 test plates total) $150.00 Description: 4 plates for 3G & 4G + backing material & weld tabs 3" W x 5" L x 1" thick ASTM A36 hot rolled plate, each plate beveled at 22.5º, beveled along both edges of the length, backing material 1" x 1/4" flat bar x 7" long (Qty. 2) + 1" x 1" x 1/4" weld tabs (Qty. 8) Gives welder a chance to complete a practice joint, then by cutting apart the welded plates along the centerline of the practice weld and rotating the plates 180º provides another joint for second practice or for test. AWS D1.1 Qualification range: "Unlimited Thickness Qualification" - This test setup qualifies the welder for material thickness qualification range from 1/8" to unlimited thicknesses. AWS D1.1 3G & 4G test is the standard of the construction industry, and it provides the welder with the most basic and msot widely accepted welder Certification, also used by industries other than construction. |
AWS D1.1 Structural Welder Performance Qualification Test Coupons - 3/8" thick
|
AWS D1.1 Structural Welder Performance Qualification Test Coupons:
3/8" thick set – ASTM A36 (Qty. 8 beveled edges / 4 plates total) $95.00 Description: 4 plates for 3G & 4G + backing material 3.5" W x 7" L x 3/8" thick ASTM A36 hot rolled plate, each plate beveled at 22.5º, beveled along both edges of the length, plus backing material 1" W x 9" L x 1/4" thick (Qty. 2) Gives welder a chance to complete a practice joint, then by cutting appart the welded plates along the centerline of the practice weld and rotating the plates 180º provides another joint for second practice or for test. AWS D1.1 Qualification Range: "Limited Thickness Qualification" - This test setup qualifies the welder for up to 3/4" material thickness qualification. It is ideal for testing using the GMAW (MIG) and FCAW-G (Dual-Shield) welding processes, when production work tmaterial thicknesses will not exceed 3/4". |
PIPE COUPONS
ASME Section IX Welder Qualification Test Coupons - 6" Schedule 40 or 6" schedule 80
|
ASME Section IX Welder Qualification Test Coupon
for 6G Process Piping ASME B31.3 & Power Piping ASME B31.1 Qty. 4 beveled edges - 2 coupons total $95.00 Description: 2 pipe coupons - 6" SCH 40 (0.280" WT) or SCH 80 (0.432" WT) ASTM A53 or SA106 Grade B pipe . 4" long coupons, beveled on both ends at 37.5º, for performance qualification test & for pracice before testing. |
ASME Section IX Welder Qualification Test Coupons - 2" NPS XXH
|
ASME Section IX Welder Qualification Test Coupon
for 6G Process Piping ASME B31.3 & Power Piping ASME B31.1 Qty. 4 beveled edges - 2 coupons total $65.00 Description: 2" NPS (0.436" WT) XXH ASTM A106 Grade B pipe, 4" long coupons, beveled on both ends at 37.5º, for performance qualification test & for practice before testing. |
WELD LAB SERVICES
VISUAL INSPECTION OF WELDS (VT)
MECHANICAL TESTING (DESTRUCTIVE TESTING):
GUIDED BEND TESTS
MACRO-ETCH TESTS
FILLET WELD BREAK TESTS
TENSION TESTS
MECHANICAL TESTING (DESTRUCTIVE TESTING):
GUIDED BEND TESTS
MACRO-ETCH TESTS
FILLET WELD BREAK TESTS
TENSION TESTS
| 2022 Destructive Testing Rate Sheet |